Topic 11.3.3: Download Project

  1.   Turn on the target device, and then make sure your development workstation can connect to the device using either serial or Ethernet communication
  2. Run Remote Agent, or restart the device so that it runs automatically. The remote Agent window is displayed.     
  3.  The communication settings in Remote Agent, Click Setup. The Setup dialog box is displayed.
      • Select the appropriate connection type: Serial Port or TCP/IP. If you select Serial Port, also select the COM port and review the advanced settings. If you are already connected to the target device via ActiveSync, you do not need to select another connection at this time. However, keep in mind how the target device will actually be used during project run time.
      • Click OK.
      • If you selected TCP/IP for the connection type, note the device's IP address.
      • Make sure that you leave Remote Agent running on the target device.
  4. The Remote Management tool to connect to the target device
      • Run the project development application on your computer.
      • On the Home tab of the ribbon, in the Remote Management group, click Connect. The Remote Management dialog box is displayed. 
      • Select the appropriate connection type for the target device: Host, Serial Port, or Microsoft ActiveSync. If you select Host, also type the host name or IP address of the target device. If you select Serial Port, also select the COM port and verify the advanced serial communication settings.
      • Click Connect.
  5. Go to Project tab and define the target location of the application file.

    ·       Select the download button to download the Files on target machine.

    Select Run or Stop According to the requirement.


Last modified: Thursday, 17 October 2019, 4:32 PM