Topic 8.2.2: Batch Display Layout

  • Batch Display Layout
    • The Batch Display main dialog box is divided into many sections.
    • These sections can be seen in the following figure and are described below:

  • Batch Identification: Across the top of the Batch Display main dialog box is the batch identification information. Included here are the Campaign ID, Lot ID, Batch ID, Mode, and Status.
  • Question List: The Question List contains a dynamic list of active questions. Answering a question requires the selection of the question and the appropriate answer button.
  • Phase List: The Phase List contains a dynamic list of active phases. The equipment allocated for each phase and the status of each phase is also included in the list.
  • Phase Parameter List: The Phase Parameter List provides a dynamic list of all formula parameter for active phases, as well as the ability to change parameters.
  • Batch Control Buttons: The Batch Control Buttons give the user the ability to start the batch, hold the batch, restart the batch, abort the batch, and change the batch mode.
  • Phase Control Buttons:The Batch Control Buttons give the user the ability to start a phase, hold a phase, restart a phase, abort a phase, acknowledge a phase, satisfy phase control buttons, enter a phase or batch comment, view phase interlocks, and manually select equipment for phase execution.
  • View Doc/Ack Doc Button: The View Doc button provides the necessary operator interface to view a document that is specified as part of a phase. Once the document is viewed, the button label changes to Ack Doc, requiring operator acknowledgement in order to continue execution.
  • Instruction List: The Phase List provides a list of instructions associated with the phase selected in the Phase List.
  • Sequence of Phases: The Sequence of Phases dynamically shows the current phases running in the selected batch for the selected operation. The status of each phase in the SFC is represented with colors.

  • Sequence of Unit Procedures and Operations: The Sequence of Procedures and Operations dynamically show the current Procedure and Operation that are running in the selected batch. The status of each unit procedure and operation in the SFC is represented with colors.

Last modified: Wednesday, 6 May 2020, 2:46 PM