2.2) Using the X-Force Capture Process
After initial configuration X-Force Capture Process you'll get this window.
System manager menu will display all the created channels and on click of channel it will display data capturing through particular channel and its configuration parameters. Below is the parameter description for the main window of capture process.
|
Sr. No. |
Field Name |
Description |
|---|---|---|
|
1 |
Channel Name |
Display the name of the selected channel |
|
2 |
Port No |
Serial / network Port on which data is coming from DCS end |
|
3 |
Local IP |
IP of the Local / AIMS System |
|
4 |
Remote IP |
IP of the DCS system from when ae are fetching data |
|
5 |
Backup IP |
IP of the Backup System |
|
6 |
Connected/Disconnected |
Status of the channel |
|
7 |
Enable option |
Will allow to change the serial default parameter like CTS, DTR, CD, etc. |
|
8 |
Apply |
Apply the changes while capturing the data. |
To Exit the system, go to system menu and select Exit option.
To open Help, go to Help menu and select View Help menu.